Burners

BIO, ZIO

For industrial furnaces and firing systems in the iron and steelindustries in the precious, nonferrous and light metal sector as wellas in the plastics, fibre and paper industries. Other fields ofapplication are thermal incineration installations, as...

BIC, ZIC

For industrial furnaces and firing systems in the iron and steelindustries in the precious, nonferrous and light metal sector as wellas in the plastics, fibre and paper industries. Burners BIC, BICA orZIC can also be used in thermal incineration installations,...

BIC.M

Special BIC variants which can be switched to Menox mode for ultralow NOX at furnace temperatures > 850°C/1560°F in conjunctionwith a special burner control unit. Key attributes Ultra low NOX thanks to flameless combustion. Single gasconnection,...

BIC.L

Excess air burner for all applications requiring precise temperaturecontrol and consistent product quality. The burner is perfectlydesigned for use in tunnel kilns and intermittent systems. Thanks tothe high excess air capability, variable flue gas temperatures...

BIC..R

The annular excess air burner, comprising burner BIC or BICA,annular excess air burner housing RSG and two ceramic tubes TSC,is suitable for use in industrial kilns in the ceramics, pottery andenamel industries, particularly in highspeed kilns. Separatesecondary...

ThermJet

For industrial furnaces and firing systems in the metals industries(ferrous and non-ferrous) as well as the ceramics industry. Otherfields of application include thermal oxidizers (incineration) and avariety of drying processes. ThermJet is a direct fired,...

BBG

All-purpose, high input industrial burner for use in open heatingsystems. Depending on the required furnace temperature, theburners are used in conjunction with a stainless steel combustionchamber (BAT) or a refractory concrete combustion chamber (BRT) Key...

ExtensoHeat

The ExtensoHeat lance burner is designed for firing zones ofcontinuous kilns for bricks, roof tiles and rough ceramic products. Itis ideal for rooftop installations and furnace zones with operatingtemperatures above 750 ºC (1382 ºF). The burner lance...

Furnnox

For continuous high temperature applications (e.g.annealing/pickling lines) as well as noncontinuous applicationssuch as forge and heat treatment furnaces. Furnnox is a direct firedfurnace burner with exceptionally low emissions for continuoushigh-temperature...

TriOx

The burners TriOx have been optimized for use in continuousfurnace systems. They can be switched to INVISIFLAME® mode forultra low NOX at a furnace temperature of > 870°C. Furthermore,variants which only operate in INVISIFLAME® mode are availablefor...

Ecomax

The burners with integrated recuperator ECOMAX® are used forheating on either direct or indirect furnace systems. ECOMAX® selfrecuperative burners are used in conjunction with metal or ceramicradiant tubes as indirect heating equipment whenever thecombustion...

TJSR

TJSR is a direct fired, self recuperative burner that combines a highvelocity flame with fuel saving recuperation. A space-savingintegral eductor pulls the furnace exhaust through an internal SiCrecuperator. This can improve furnace efficiency by reducing...

SER

SER (Single Ended Radiant Tube Burner) is a Nozzle-mixing burnerwith a recuperator that is coaxially mounted inside a single endedradiant tube. Combustion air entering the SER burner is preheatedin the recuperative section by exhaust gases to provide...

TFB

The Tube Firing Burner (TFB) is designed to fire into radiant andimmersion tubes. The unique nozzle design creates a uniform,adjustable flame length. The long, spiraling flame results in cleanercombustion, efficient heat transfer and uniform tube temperatures.The...

BU

The Bayonet-Ultra Recuperator is a high efficiency heat exchangerdesigned to fit into the exhaust leg of single, U, W or Trident-typeradiant tubes. It is frequently paired with Eclipse Tube FiringBurners and is suitable for use with exhaust streams up...

E-Jector FGR

E-Jector is a flange-mounted device that is used with radiant tubesto reduce NOX emissions by mixing flue gases with combustion air.It accommodates radiant tube diameters of 102 – 152 mm (4 – 6inches). E-Jector is frequently used with Eclipse Bayonet-stylerecuperators...

PrimeFire 100

The PrimeFire 100 oxygen-fuel burner has become an industrystandard for glass furnace applications. It provides improvedrefractory life and reduced melting costs. The burner produces aconical-shaped flame and has multiple-fuel capabilities, fromnatural...

PrimeFire 300

The PrimeFire 300 burner for glass furnaces creates a fan-shapedflame with low momentum, which creates a lower peak flametemperature. This results in lower operating crown temperaturesand lower volatile transport rates. The flame shape can be adjustedto...

PrimeFire 400

PrimeFire 400 oxygen-fuel burner creates a fan-shaped flamegeometry. The burner mixes a portion of the combustion oxygenwith the fuel stream, causing gas cracking. This produces freecarbon particles that increase flame luminosity which improves theradiant...

BrightFire® 200 is an adjustable, low NOX, airfuel burner,compatible with regenerative glass furnaces. The burner providessuperior flame adjustability by splitting the gas inside the burnerinto two independently variable gas flows. This allows increasedflexibility...

WGD

Low NOX WGD burners are compact, watercooled through-portburners designed to be inserted into the port neck of regenerativeglass furnaces. Using a unique arrangement of converging flat jetnozzles, the burner produces a flat, fan-shaped luminous flame.This...

O4V

The 04V is an adjustable air-gas nozzle-mixing burner, suitable forglass furnace applications ranging from small glass day tanks, floatglass furnace working ends, refiners and distributors, to large multi-burner recuperative furnaces. 04V burners can...

AirHeat v1

AirHeat v1 is a compact modular burner, designed to generate alarge volume of clean hot air for a wide range of industrial heatingapplications. All standard models feature an integrated combustionair blower mounted on the burner’s steel case. By supplying...

AirHeat v2

AirHeat v2 is a completely packaged line burner. Applicationsinclude ovens, driers, fume incinerators and similar industrialequipment. This burner provides simple, reliable operations, pluslower CO emissions than other competitive air heating burners....

RatioStar is a modular duct burner designed with on-ratio controlfor direct fired air heating applications. Burners are configured inrows of up to 24 modules. Propagation modules connect individualburner rows to provide cross ignition. This modular design...

Minnox

The Minnox burner design utilizes a premixed gas/air mixture withexcess air. The result is a cooler flame which produces a very lowNOX discharge. The recirculating flame geometry acts tosignificantly reduce CO emissions. Minnox systems are typicallysupplied...

Linnox ULE

Linnox ULE is designed for use in any direct or indirect fired airheating application requiring excellent heat distribution,temperature uniformity, low emissions and simple robust controls.Burner operation is based on a high excess air pre-mix combustionthat...

AH-MA

AH-MA is a line-type burner, ideal for heating fresh air in make-upand process air heating applications. The burner operates over awide range of velocities, inputs and fuels. AH-MA produces auniform, odourless, smokeless flame, while optimizing emissionsand...

FlueFire

FlueFire is an in-duct burner designed for supplemental firing incogeneration and combinedcycle installations. The burner is alsosuitable for fresh air operation or incineration applications. TheFlueFire takes its oxygen requirement from the turbine exhaustgases....

InciniFume

InciniFume is a modular in-duct burner. The burner uses theoxygen within the exhaust flow to complete the combustionprocess. The short flame and uniform temperature distributionmake it ideal for a variety of industrial processes requiring largeheat inputs...

RatioMatic

RatioMatic is a packaged air heating burner that features simpleoperation and robust, reliable performance. The ratio regulator anddirect drive air butterfly valve simplify start-up and adjustment. Thefast mixing nozzle provides clean, stable flame at...

Winnox

Winnox is designed to comply with global emissions regulations.Easy to set up and operate, the low NOX Winnox burner is ideal forair heating and oven applications. Winnox features an intense,short, swirled flame that is completely contained within the...

ThermAir

ThermAir is a nozzle-mixing burner with a packaged air blower thatis designed to fire with fixed combustion air over a wide turndownrange. The burner is simple to set up and adjust. ThermAir burnersare ideal on heaters, textile ovens and in situations...

RatioAir

RatioAir is a premium air heating burner ideally suited forapplications that require a velocity burner with an integratedpackaged blower and ratio control. RatioAir burners can deliverflame speeds of up to 150 m/s (500 ft/s) to deliver improvedtemperature...

Incini-Cone

Incini-Cone burners are designed for fume incineration and theafter-heating of exhaust from turbines, driers, ovens and similarequipment. The burner is mounted in the exhaust duct and requiresthe exhaust stream to supply all of the oxygen needed forcomplete...

HeatPak

Completely pre-assembled and pre-wired burner packages basedon either RatioMatic, RatioAir or ThermAir with mounted fan, gassafety and control system and automatic burner control unit forapplications in industry. Thanks to their compact design, bothconversion...

ImmersoJet

ImmersoJet is a nozzle-mixing, tube-firing burner designed to fireat high velocities through a small diameter immersion tube inimmersion heating tanks. The combustion gases from the burnerscrub the inner tube surfaces to produce a high heat transfer rateand...

ImmersoPak

The ImmersoPak burner is ideal for heating immersion tubes oncleaning tanks, spray washers, salt baths, quenching tanks,tempering tanks, asphalt tanks and similar equipment. Immerso-Pak is easy to install, simple to operate, and offers durability andlong...

RHT

Indirect Air Heaters RHT are designed to heat recirculating ovensand driers where the products of combustion must be isolatedfrom the process air stream. They are also excellent for use inindustrial space heating systems. The firing chamber and exhausttubes...

ER

Indirect Air Heaters ER are ideal for heating and drying applicationsrequiring contaminant-free process air. Typical applications includepharmaceutical spray driers, chemical driers and drying ovens. Inaddition, component options are available to meet...

ZAI

Atmospheric pilot burner.

ZMI

With forced air supply.

ZKIH

With forced air supply.

ZIO 40

With forced air supply.

Burner Nozzles

Small burners for use in groups to heat a wide area. For use as pipeburners with pre-mixed air/ gas.

Sticktite Burner Nozzles

Open-type burner nozzle with built-in flame retention. For use withair/gas mixers.

Ferrofix Burner Nozzles

Open-type burner nozzle with built-in flame retention. For use withair/gas mixers.

ZTA

For safe ignition and thermoelectric safeguarding in conjunctionwith control valve S11T of gas burners in applications withoutvoltage supply. Atmospheric pilot burner.

ZT 40

For safe ignition and thermoelectric safeguarding in conjunctionwith control valve S11T of gas burners in applications withoutvoltage supply. ZT 40..A: atmospheric, ZT 40../100: with forced air supply.

ZTI 55

For safe ignition and thermoelectric safeguarding in conjunctionwith control valve S11T of gas burners in applications withoutvoltage supply. Atmospheric pilot burner with ionization electrode.

Control Valves S11T

The control valve S11T operates independently of the mains powersupply. The control valve S11T..S is also available with a switch tocontrol an ignition transformer.